Struggles with Truck Registration

Truck with old small wheels

Truck with new bigger off-road wheels (37" diameter)... They still seem pretty small, but thats because the truck is quite big... I cant put bigger wheels on because of the clearance to the steering and cab on the front wheels.

 When I bought the truck, it was registered and insured as a "commercial vehicle" which pretty much all vehicles with a GVW over 5000Kg are here in British Columbia... But I was not going to use it as a commercial vehicle and the insurance rates and safety inspection requirements for that category are rather prohibitive. 

So, when I bought it I got the seller to do the annual inspection, and I immediately had it changed to a "private vehicle" but to do so i had to de-rate it to a max weight of 5000Kg... done, no problem.

Since then, Ive done a number of changes to it and when Ive needed to drive it somewhere for whatever reason, I have to go get a day driving insurance permit for it at about $30 per day. But it is now at a usable level of completion, so I wanted to use it more often and the day permits get expensive quickly... So next step was to change its registration one more time to the "motorhome" category... which would mean far cheaper insurance and minimal restrictions on other technical factors as its not used for passengers or commercial purposes in general.

BUT... To do that, according to the rules in BC, it needs another safety inspection, and a weight certificate from a weighbridge.

So, I looked around for a local auto shop with the appropriate inspection license to do that for me... But, all the local places for cars dont do large vehicles, and all the places that do larger vehicles only do commercial vehicle inspections which are much more stringent and more expensive too.

Oh well, I signed up for the couple of hundred dollars extra and took the truck in... But its a bit of a scam on costs, since to use your truck you NEED this inspection certificate annually... and the truck mechanics know it, so they always find sudrie minor defects that they can charge exorbitantly to fix on the spot for you so you can get the damn inspection certificate... and in my case they claimed that in order to inspect the brakes properly they would have to take the wheels off to see (valid requirement), BUT, they claim the wheel removal and replacement would take upto 6 hours to complete! at about $150 per hour charge-out rate!!!   BULLSHIT!!!

I canceled the inspection but that left me no closer to being insured.

Sooo, I figured I would try to get around this issue by replacing the tires (which dont need to be replaced yet but will be within a year or so, so now is not a bad time)... Theory being that the tire shop would change the wheels quickly and cheaply, and if I went to a larger tire shop they would have the safety inspection license as well and could do their inspection while the wheels were off. (and they could make their profit on the tires rather than having to gouge me for minor little "invented" issues.

This seemed to be working out and the phone calls were made and appointments set up and all in all it would cost me a bit more than just the inspection but Id get nice new big wheels :)

So, I took the truck in on the appointed day and the tire team were good to go and the new tire were there ... and then I met the inspector... The GERMAN inspector!

Oh dear... he was a piece of work and as soon as he saw that I had drilled the chassis rails to mount the box on the truck he said... No, you need a authorized mechanical engineer to inspect that and approve it before Ill sign off on it!... So, Im screwed again! but this time Ive paid out a couple of thousand extra dollars for new tires that I cant really use without the valid inspection.

What to do??

Well, actually, the German inspector helped me out... He said he didnt think I needed the safety inspection to do the registration as a motorhome because he knew a guy who converted vans like this quite often and he never needed the safety inspection...

Anyway, after about a half a day of waiting and phone calls to other insurance agents, I connected with a particular insurance agent who said he could do what I needed and that it would cost no more than normal.

So, I went in to him and we filled in the forms, and it all went through OK with the BC insurance corporation, and I paid for 3 months insurance and the truck is no a "MotorHome"... No drama at all... though I have this form that clearly states I should have needed a signed safety inspection?  though Im sure the truck is safe anyway, Im not going to ask questions at this point :)

So, the truck now has its new wheels... and the spare tire rack is on and the interior lights are wired up and working, and the TPMS monitor and reversing camera all now work too... ongoing tinkering.

Welded up rear rack

Rear rack, storage box, and spare wheel mounted.

Next big project is to modify and fit the cab-habitat passthrough... means i need to cut very large holes in both the cab and the habitat box and get it all waterproofed and sealed up before the rains start up here in Vancouver... probably in a couple of weeks time.